ECU remapping and performance tuning specialists in Kent, Sussex and London
Telephone: 07904 961410
ECU remapping and performance tuning specialists in Kent, Sussex and London
Telephone: 07904 961410
DPF Cleaning Solutions in and around Sussex, and the South East; including Eastbourne, Hastings, Horsham, Bexhill, Worthing and Crawley
On your drive, or outside of the office, we will diagnose your DPF issue and perform our DPF cleaning solution wherever is most convenient for you. To find out more about our DPF cleaning services or to book an appointment, please get in touch with us today.
Our DPF cleaning technicians will contact you to discuss your DPF cleaning requirements.
Diesel particulate filters (DPF) are devices installed in the exhaust system of modern diesel cars. The purpose of the DPF is to capture soot particles generated from the engine. As these accumulate, it impedes the flow of exhaust gases leading to blockage.
The car’s engine warning light will typically be triggered when this occurs, and the vehicle may start running more sluggishly. In certain instances, replacement of the DPF might be necessary – but it can prove rather costly.
An alternate solution to this issue is DPF cleaning, which requires specialised equipment. This process eliminates the soot and other particulates that have accumulated in the filter, thus restoring it to its full effectiveness.
At Xclusv Remapping, we offer DPF cleaning services in Eastbourne, Hastings, Horsham, Bexhill, Worthing, Crawley, Brighton & Hove and nearby towns. Our team of professionals will clean your DPF promptly and competently so you can get back on the road quickly.
To find out more about our DPF cleaning services or to book an appointment, please get in touch with us today.
The DPF, otherwise known as a diesel particulate filter, is installed on contemporary diesel cars to filter out soot and other substances from exhaust fumes. As it accumulates these contaminants, the DPF can become blocked and cause a variety of issues.
A clogged DPF can significantly decrease the efficiency of your car. As it progressively becomes more clogged, you will notice a drop in acceleration and potentially difficulty reaching higher speeds.
A blocked DPF can cause your vehicle to be less fuel efficient, as the motor must exert additional effort to push exhaust gases through the filter. Furthermore, a fully clogged filter may induce overheating in the engine, which could result in engine harm. How regularly must one clean their DPF? Most manufacturers suggest a cleaning every 20,000 to 30,000 miles. That said, this estimation is subject to change according to driving practices; if you tend to take shorter trips around urban areas, it’s likely the filter accumulates dirt at a faster rate since the soot particles are unable to burn off.
If you mostly use the motorway, it’s unlikely the DPF filter will become blocked as quickly as other particles that would normally be burned off due to speeding. It is important though to stay aware of how your car is running, and get your DPF filter cleaned if there is any downward progress.
If you’ve any queries regarding our services or require your DPF filter to be cleaned, don’t hesitate to reach out to us. We look forward to helping you!
Our DPF cleaning technicians will contact you to discuss your DPF cleaning requirements.
Cleaning DPF provides multiple advantages, such as improved MPG, extended service life of the DPF, lower ash regeneration, reduced soot and emission levels as well as re-established power.
In order to clean the soot from your diesel particulate filter (or DPF) and to remove blockages, you can use the DPF cleaning method.
Using our specialised DPF cleaning equipment, all diesel particulates, soot, carbon, wax, ash, and tar will be effectively removed from the DPF.
Typical DPF cleaning improves fuel economy by 10%, saving the average customer approximately £200 every year. The cleaner the filter, the less harmful emissions the vehicle produces as well.
A Diesel Particulate Filter (DPF) is created to trap soot from a diesel engine’s exhaust. All diesel cars manufactured in 2007 or afterwards must include this filter.
Particulate filters are highly successful in cutting down on the particulates discharged from diesel engines, with regeneration of the filters needing to take place regularly.
When comparing how a DPF works, there are two distinct regeneration strategies. If the car is traveling at a minimum of 40 mph when the filter becomes full, it will initiate an automatic regeneration to incinerate the accumulated particulate. However, some retrofit filters rely on passive chemical regeneration; this requires that the exhaust temperature for at least 30% of the duty cycle must exceed 575°F. After either process, the filter may contain a small amount of soot or ash.
If the vehicle remains idle for extended periods, an alert will be displayed on its dashboard that requires the driver to manually initiate regeneration. The amount of ash built up in the filter will determine how often this needs to happen. As the DPF becomes more blocked, fuel efficiency and engine power diminish, similarly warning indicators may appear. If these are neglected, the engine will shut down until it is professionally serviced.
A DPF clean is necessary to not only increase your vehicle’s fuel efficiency, but also decrease the toxic pollutants it emits.
Typical blockages in a DPF are often caused by excessive short trips which have stopped regeneration from occurring. As a rule, the problem is typically linked to another issue such as an error in a DPF sensor, incorrect engine oil or a worn-out turbo.
If your warning light doesn’t go off, turns red or extra DPF lights come on, don’t delay having it looked at by a specialist. Neglecting to do so can lead to further harm and potentially turn a simple fix into an expensive one.
A blocked diesel particulate filter (DPF) can be cleaned through a process called forced regeneration, but this is only a temporary fix that masks the underlying problem for 2-4 weeks. If not addressed effectively, being steadily blocked increases harmful exhaust emissions and diminishes engine performance, sometimes even putting the car into a restricted ‘limp-home mode’. In some models, the engine may not start after travelling a certain distance; continually driving with a blocked DPF can result in further damage to components which leads to greater problems.
Our state-of-the-art equipment allows us to provide roadside DPF cleaning for vans and cars alike. We’re able to identify the DPF’s performance and reduce levels of soot and particulates, giving you results that show we’ve saved you money. Plus, it’ll get you back on the road quickly!
DPF Cleaning in Eastbourne, DPF Cleaning in Hastings, DPF Cleaning in Horsham, DPF Cleaning in Bexhill, DPF Cleaning in Worthing, DPF Cleaning in Crawley, DPF Cleaning in Brighton and Hove
Enter your details below to get performance details & prices for YOUR vehicle….